The fire pit on the patio runs on propane — no wood needed. Here's the start-up:
- 1Lift the weather cover off the pit and set it to one side.
- 2Open the access door on the side of the pit and turn the propane valve on.
- 3Push the gas control knob in and turn it until you hear gas flowing.
- 4Press the ignition button. Keep the knob held in for a few seconds until the flame is stable, then release it.
- 5Use the knob to turn the flame up or down.
- 6When you're done, turn the gas off, then close the propane valve. Once the pit has fully cooled, replace the weather cover.
Pull up one of the Adirondack chairs and enjoy.